PRODUCTS > Assessment Module > PLM-060 >

PLM-060

Description

Applicable for digital power meter portal, with the distance communication through power line, the PLC (power line communication) Module-PLM -060 is mainly used for mass meter reading (MMR), home / building automation, etc. See image 1 for the out look.


  1


Features
  • -32-bit super intelligent CPU (STAPLM-300);
  • LonTalk® protocol firmware integrated to make easy and reliable subnets in MMR and home automation;
  • BPSK and DSP technologies applied to read with PLC. ;
  • Smart and slim.

Chief Technical specifications:
Power supply AC220V±20% 50Hz±5%
Static power 1W
Max power 2W
Vp-p sending value 3.3V
Receiver sensitivity -70dBV
Signal Frequency scope 67KHz ~ 131 KHz
Power line data transmission rate 2.8KBPS ~ 5.4 KBPS
Working temperature -40℃ ~ 85℃
Relative humidity ≤85%
Dimension 138×78×50
Weight 0.7Kg

Applications
1.PLC:
  • BPSK and DSP technologies applied to achieve the datacommunication through 3 phase power line and 8 programmabletransmission frequencies selectable(67KHz ~ 131 KHz)
2.PLC indication:
  • Indicator lights used for signal sending, receiving and frequencychannel。

Portals
Terminal No. Notes
UART1 application
UART1-1 GND
UART1-2 connected with RX of PC
UART1-3 connected with TX of PC
UART2 DEBUG communication portal
UART2-1 GND
UART2-2 connected with RX of PC
UART2-3 connected with TX of PC
S4 Download/Test Switcher
S4-RUN state “RUN”
S4-DEBUG state “DEBUG”
H1 Pin connector
H1-1 VBB-SW2
H1-2 VDD-DROP
H1-3 VBB-SW1
H1-4 PE0
H1-5 D3V3
H1-6 N/A
S5 Serial port 2 mode switcher
S5-HS UART2 Null
S5-UART2 connected to STAPLM-300 UART2
S1 复位按键
S2 服务按键
J8 预留IO口
J8-1 PC0
J8-2 PC1
J8-3 PC2
J8-4 PC3
J8-5 PC4
J8-6 PC5
J8-7 PC6
J8-8 PC7
J8-9 PD0
J8-10 PD1
J8-11 PD2
J8-12 PD3
J8-13 PD4
J8-14 PD5
J8-15 PD6
J8-16 PD7
J8-17 PE0
J8-18 PE1
J8-19 PE2
J8-20 PE3
J8-21 PE4
J8-22 PE5
J8-23 PE6
J8-24 PE7
J8-25 D3V3
J8-26 GND

Package content
PLM-060:
  • one module
  • one manual
  • one product type
Cautions
  • Only for the rated voltage and load.
  • DO NOT expose IC in environments such as rain, the high temperature, etc.
  • Improper usage, maintenance or storage or Take-apart may cause unexpected loss or consequence.
  • Avoid serious collision, jolt and striking in the course of transportation.
  • Instrument shuold be kept in a draughty place with noncorrosive air, ambient temperature range -50 'C -- +100 'C, and a humidity less than 95%RH (noncondensation).

Other
    Detailed technical documents included in Product Instructions. Please kindly download Instruction of PLM-060 to learn more.
ABOUT US   CONTACT US      © COPYRIGHT © 2006. SWIP. ALL RIGHT RESERVED.;Xi'an NetPolice XA11128